This 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance for challenging industrial applications. Engineered for reliability, it ensures smooth operation and extended service life in demanding conditions.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 76mm |
| Outside Diameter | 109mm |
| Width | 39mm |
Designed for demanding industrial environments, this deep groove ball bearing boasts an inside diameter of 76mm, an outside diameter of 109mm, and a width of 39mm. Constructed from high-grade 304 stainless steel, it provides superior resistance to rust, corrosion, and chemical attack, making it ideal for food processing, chemical handling, marine, and outdoor applications. The robust design ensures high load-carrying capacity and efficient, low-friction rotation, contributing to the longevity and reliability of your power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, using a suitable press or arbor, ensuring even pressure. 3. Install the bearing into the housing, again applying even pressure to avoid misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a bearing press or induction heater for controlled installation. Apply force only to the ring being fitted. |
| Improper lubrication, either too little or too much, leading to premature wear or overheating. | Consult the bearing manufacturer's specifications for the correct grease type and fill volume. Ensure even distribution. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Chemical Processing Machinery, Marine and Offshore Equipment, Medical Devices, Outdoor and Corrosive Environment Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||