This 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and smooth rotational performance. Its robust construction makes it ideal for demanding industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 75mm |
| Outside Diameter | 199mm |
| Width | 6mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 75mm and an outside diameter of 199mm, with a narrow width of 6mm. Constructed from premium 304 stainless steel, it exhibits superior resistance to rust and chemical degradation, making it suitable for applications involving moisture, saltwater, or aggressive media. The precision-ground raceways and hardened steel balls ensure low friction, quiet operation, and extended service life under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating shaft/housing surfaces. 2. Apply a thin, even layer of appropriate lubricant to the shaft and inside bore of the bearing. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it seats squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or race damage. | Utilize a bearing press or appropriate induction heater for controlled installation, applying force evenly to the ring being mounted. |
| Inadequate or incorrect lubrication, causing premature wear and reduced lifespan. | Consult the bearing manufacturer's lubrication guidelines for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Marine equipment, Food processing machinery, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||