This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. Engineered for smooth, low-friction operation in demanding power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 37mm |
| Width | 21mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 73mm, an outside diameter of 37mm, and a width of 21mm. Fabricated from premium 304 stainless steel, it exhibits exceptional resistance to corrosion, making it suitable for operation in humid or chemically aggressive environments. This material choice ensures extended service life and reliable performance under moderate radial and axial loads, facilitating efficient power transfer in a wide array of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surface is clean and free of debris. 2. Carefully press the bearing onto the shaft using appropriate tooling, ensuring a uniform fit. 3. Secure the bearing in its housing with a retainer or interference fit, verifying axial and radial play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the mounting surfaces leading to contamination. | Thoroughly clean both the shaft and housing bore with a lint-free cloth and a suitable degreaser before installation. |
| Applying excessive force or shock load during installation, damaging raceways. | Use a dedicated bearing press or a carefully controlled hammer and drift to apply force evenly on the ring being fitted. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||