This 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and reliability. Engineered for high-performance power transmission, it ensures smooth operation and extended service life in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 194mm |
| Width | 17mm |
A high-performance industrial component, this deep groove ball bearing is precision-manufactured from high-grade 304 stainless steel, providing superior resistance to corrosion, oxidation, and a wide range of chemicals. With an inside diameter of 55mm, an outside diameter of 194mm, and a width of 17mm, it is designed to accommodate significant radial and axial loads. The inherent properties of 304 stainless steel contribute to its suitability for applications exposed to moisture, washdowns, or aggressive media, ensuring consistent performance and longevity in sectors such as food processing, chemical handling, and marine equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. Verify dimensions are within specified tolerances. 2. Carefully press or mount the bearing onto the shaft, ensuring it is seated squarely and without tilting. Avoid applying excessive force directly to the inner ring if possible. 3. Once the inner ring is secured, position the bearing within the housing, again ensuring a square fit and even pressure distribution. Secure the housing as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact to the bearing during installation, particularly on the outer ring when mounting to a shaft, or vice versa. | Utilize appropriate bearing mounting tools (e.g., presses, induction heaters, or specialized bearing pullers) to ensure even force distribution and prevent damage to raceways and rolling elements. Never hammer directly on the bearing. |
| Incorrect lubrication, either insufficient or excessive, or using incompatible lubricant types. | Consult the bearing manufacturer's specifications for recommended lubricant type and quantity. Ensure the lubricant is clean and applied correctly to the bearing before and during operation as per the application's requirements. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Chemical Processing Machinery, Marine and Offshore Applications, Medical and Pharmaceutical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||