Engineered for superior load-bearing and smooth rotational performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and durability for critical power transmission systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 56mm |
| Width | 29mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing features a precise 62mm inside diameter, a 56mm outside diameter, and a 29mm width. Constructed from premium 304 stainless steel, it provides excellent resistance to corrosion, rust, and chemical degradation, making it ideal for applications exposed to harsh environments. The raceway design ensures efficient load distribution and minimal friction, contributing to extended service life and reliable operation in demanding power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Install the bearing into the housing, applying even pressure until fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a proper bearing press or induction heater for controlled and even installation. Avoid hammering. |
| Contamination of the bearing during handling or installation. | Keep bearings in their original packaging until ready for installation and work in a clean environment. Use clean tools. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Conveyor Systems, Electric Motors, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||