Engineered for superior performance in challenging environments, this 304 stainless steel deep groove ball bearing offers exceptional durability and corrosion resistance for critical power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 76mm |
| Width | 40mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing features an inside diameter of 62mm, an outside diameter of 76mm, and a width of 40mm. Constructed from premium 304 stainless steel, it provides excellent resistance to rust, corrosion, and a wide range of chemicals, making it ideal for food processing, marine, and chemical handling machinery. The robust design ensures high load-carrying capacity and smooth, low-friction operation, contributing to extended equipment lifespan and reduced maintenance requirements in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or jig, applying force evenly to the outer or inner ring respectively. 3. Verify the bearing rotates freely and without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during press-fitting. | Always apply force to the ring that is being fitted to its mating component (inner ring to shaft, outer ring to housing) to avoid damaging the raceways. |
| Contaminating the bearing during installation. | Handle bearings with clean hands or tools, and install them in a clean environment to prevent the ingress of dirt or debris. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine and Offshore Machinery, Chemical Processing Systems, Conveyor Systems in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||