Engineered for superior performance and longevity, this 304 stainless steel deep groove ball bearing offers exceptional resistance to corrosion and extreme conditions. Its robust design ensures reliable operation in demanding industrial power transmission systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 69mm |
| Outside Diameter | 110mm |
| Width | 20mm |
Purpose-built for heavy-duty applications, this 304 stainless steel deep groove ball bearing boasts an internal diameter of 69mm, an external diameter of 110mm, and a width of 20mm. The 304 stainless steel construction provides excellent corrosion resistance, making it ideal for environments exposed to moisture, chemicals, or saltwater, and ensuring extended service life. Its high load-bearing capacity and low friction coefficient make it a critical component in power transmission systems requiring reliable rotational movement under significant stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surface is clean and free from debris. Apply a thin layer of appropriate lubricant to the shaft and inner bore of the bearing. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without tilting. Avoid hammering directly on the bearing's outer ring. 3. Mount the shaft assembly into the housing, ensuring the outer ring of the bearing is properly supported and retained according to design specifications. Check for free rotation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during mounting, leading to brinelling or cage damage. | Utilize a bearing press or appropriate induction heater for controlled mounting. Apply force only to the ring being fitted. |
| Incorrect lubrication, either insufficient or using incompatible lubricants, leading to premature wear. | Consult the bearing manufacturer's lubrication chart and ensure the selected lubricant is compatible with the operating temperature and environment. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Gearboxes, Conveyor Systems, Marine Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||