This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. Engineered for efficient power transmission in challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 67mm |
| Outside Diameter | 103mm |
| Width | 22mm |
Specified by design engineers worldwide, this 304 stainless steel deep groove ball bearing is manufactured to precise tolerances for optimal performance. Its 67mm inner diameter, 103mm outer diameter, and 22mm width are ideal for applications requiring robust load-bearing capabilities and resistance to environmental degradation. The 304 stainless steel composition ensures excellent corrosion resistance, making it suitable for wet, humid, or chemically aggressive conditions where traditional bearings would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and the shaft. 3. Carefully press the bearing onto the shaft using a controlled force, ensuring alignment, or seat it within the housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper lubrication leading to premature wear. | Utilize the correct type and quantity of lubricant as specified for the operating conditions and bearing load. |
| Forcing the bearing installation, causing brinelling or damage to raceways. | Employ a bearing press or a properly sized mandrel for controlled and even pressure during installation. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Marine equipment, Food processing machinery, Chemical handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||