This 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and reliability. Engineered for smooth operation and long service life in challenging industrial applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 66mm |
| Outside Diameter | 137mm |
| Width | 47mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing ensures precise rotational performance and minimal friction. The high-grade 304 stainless steel construction provides superior resistance to corrosion, rust, and a wide range of chemical agents, making it ideal for wet, humid, or chemically aggressive environments. With an inside diameter of 66mm, outside diameter of 137mm, and a width of 47mm, it is designed for robust load-bearing capabilities in power transmission systems, pumps, and food processing machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fit. | Always apply installation force to the inner ring when mounting on a shaft, and to the outer ring when mounting in a housing. |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or tools and install in a clean environment to prevent ingress of dirt or grit. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine and Offshore Applications, Chemical Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||