Engineered for robust performance, this 304 stainless steel deep groove ball bearing offers exceptional load-carrying capacity and smooth operation in demanding power transmission applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 66mm |
| Outside Diameter | 77mm |
| Width | 20mm |
A high-performance industrial component, this 304 stainless steel deep groove ball bearing is meticulously manufactured with an inside diameter of 66mm, an outside diameter of 77mm, and a width of 20mm. The inherent corrosion resistance of 304 stainless steel ensures longevity and reliability in environments prone to moisture or aggressive substances. This bearing's design excels in handling moderate radial and axial loads, making it ideal for applications requiring efficient rotational movement and minimal friction. Its construction promotes extended service life and operational stability under continuous use, a critical factor in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft surfaces are clean and free from debris. 2. Gently press the bearing onto the shaft or into the housing, utilizing a bearing press or appropriate tooling to apply even pressure. 3. Verify smooth rotation and proper seating before engaging the power transmission system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing press or a bearing heater for controlled installation. Ensure even pressure is applied to the correct ring of the bearing. |
| Contamination of bearing surfaces during handling or installation. | Keep bearings in their original packaging until ready for installation. Handle with clean, lint-free gloves and ensure a clean work environment. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps and Compressors, Conveyor Systems, Electric Motors and Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||