This robust deep groove ball bearing, crafted from premium 304 stainless steel, delivers exceptional load-bearing capacity and smooth rotational performance. Its corrosion resistance makes it ideal for challenging environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 92mm |
| Outside Diameter | 76mm |
| Width | 45mm |
Engineered for reliability and performance, this deep groove ball bearing features a precise 92mm inside diameter, a 76mm outside diameter, and a 45mm width. Constructed from durable 304 stainless steel, it offers superior corrosion resistance, excellent toughness, and good ductility, making it suitable for applications exposed to moisture, chemicals, or other corrosive elements. This design ensures minimal friction and long service life under moderate to heavy radial and axial loads, making it a critical component in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly before installation. 2. Carefully apply a light, uniform coating of appropriate lubricant to the bearing raceways and the shaft. 3. Press the bearing onto the shaft or into the housing using a controlled force, ensuring proper alignment and avoiding excessive impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing with excessive impact during press-fitting. | Utilize a proper press with controlled force and alignment tools to prevent brinelling or damage to the raceways and balls. |
| Inadequate lubrication or using the wrong type of lubricant. | Ensure the bearing is adequately lubricated with a grease or oil specified for the operating conditions and load requirements. Refer to lubricant compatibility charts. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial pumps and motors, Conveyor systems, Material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||