This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and robust performance. Engineered for high radial and axial loads, it ensures smooth, reliable operation in challenging environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 79mm |
| Width | 23mm |
A proven choice for industrial professionals, this 304 stainless steel deep groove ball bearing boasts an inside diameter of 64mm, an outside diameter of 79mm, and a width of 23mm. Crafted from high-grade 304 stainless steel, it provides exceptional resistance to corrosion and chemical attack, making it ideal for environments exposed to moisture, acids, or alkaline substances. This material also offers good mechanical strength and temperature resistance, ensuring reliable performance in a wide range of power transmission systems, including pumps, conveyors, and general machinery operating under moderate to heavy loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. Verify that the shaft and housing diameters are within specified tolerances for the bearing's fit. 2. Carefully mount the bearing onto the shaft using appropriate tooling to avoid damage. Apply steady, even pressure, ensuring the bearing seats squarely. 3. Gently press the bearing into the housing, again applying even pressure to prevent tilting or brinelling of the raceways. Confirm proper seating and clearance before operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the inner or outer ring during press-fitting, leading to brinelling or damage to the raceways. | Utilize a bearing installer kit or press with a properly sized adapter that applies force only to the ring being mounted. Ensure even pressure distribution. |
| Not properly cleaning the shaft, housing, or bearing before installation, introducing contaminants that can cause premature wear. | Thoroughly clean all mating surfaces and the bearing itself with a suitable solvent before installation. Inspect for any burrs or imperfections. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps, Conveyor Systems, Food Processing Equipment, Marine Applications, Chemical Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||