This robust deep groove ball bearing, crafted from premium 304 stainless steel, ensures reliable operation in corrosive environments. Its precise dimensions and durable construction make it ideal for critical power transmission systems requiring low friction and high load-bearing capabilities.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 119mm |
| Width | 22mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing features an inside diameter of 64mm, an outside diameter of 119mm, and a width of 22mm. The 304 stainless steel construction provides exceptional resistance to corrosion, rust, and a wide range of chemical agents, making it suitable for food processing, marine, and chemical handling equipment. Its hardened races and balls are precisely ground to minimize friction and vibration, ensuring smooth rotational performance under radial and axial loads. This bearing is designed for extended service life in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Apply a light, appropriate lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft, ensuring it seats squarely and without tilting. If pressing into a housing, ensure the housing bore is within tolerance and apply even pressure to the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning before installation, leading to premature wear. | Thoroughly clean the bearing, shaft, and housing with a suitable solvent before assembly. |
| Applying excessive force or uneven pressure during installation, causing brinelling or damage to the races. | Use a proper bearing press or induction heater to install the bearing, applying force only to the ring being mounted. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine and Offshore Applications, Chemical Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||