Engineered for demanding environments, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and reliable performance under significant loads and varying conditions.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 63mm |
| Outside Diameter | 70mm |
| Width | 17mm |
Purpose-built for heavy-duty applications, this 304 stainless steel deep groove ball bearing features an inside diameter of 63mm, an outside diameter of 70mm, and a width of 17mm. The 304 stainless steel construction provides superior resistance to rust, corrosion, and chemical attack, making it ideal for wet, humid, or chemically aggressive environments. Its robust design ensures high load-carrying capacity and extended service life, minimizing downtime and maintenance requirements in critical power transmission systems. The precision-ground raceways and high-quality balls contribute to smooth operation and reduced friction, enhancing overall system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Gently press the bearing onto the shaft or into the housing, applying even pressure. 3. Verify smooth rotation and absence of binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft or housing fit (too loose or too tight) | Ensure shaft and housing dimensions are within specified tolerances for a light press fit. |
| Contamination during installation | Install in a clean environment and keep bearing sealed until ready for use. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps and Compressors, Material Handling Systems, Food Processing Equipment, Marine and Offshore Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||