Engineered for demanding environments, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and load-bearing capacity. Its precision construction ensures smooth, reliable operation in critical power transmission applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 63mm |
| Outside Diameter | 121mm |
| Width | 9mm |
Specified by design engineers worldwide, this deep groove ball bearing is manufactured from premium 304 stainless steel, providing exceptional resistance to rust and corrosion, making it ideal for wet, humid, or chemically aggressive environments. With an inside diameter of 63mm, an outside diameter of 121mm, and a width of 9mm, it delivers optimal radial and axial load support. The robust stainless steel construction ensures longevity and consistent performance under moderate to high rotational speeds and loads, maintaining operational integrity where standard steel bearings would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure. 3. Secure the bearing using appropriate retaining rings or housing clamps, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing. | Use a proper bearing press or a carefully applied hammer with a soft drift for installation. Ensure shaft and housing tolerances are within specification. |
| Contaminating the bearing during installation. | Handle bearings with clean hands or tools. Keep the bearing in its original packaging until ready for installation to prevent dust and debris ingress. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps and Compressors, Marine Equipment, Food Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||