Engineered for reliability, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and smooth, low-friction operation. Its robust construction ensures consistent performance in diverse environments, making it ideal for critical power transmission systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 61mm |
| Outside Diameter | 134mm |
| Width | 9mm |
Precision-manufactured to tight tolerances, this 304 stainless steel deep groove ball bearing boasts an inner diameter of 61mm and an outer diameter of 134mm, with a width of 9mm. Constructed from high-grade 304 stainless steel, it exhibits superior corrosion resistance, making it suitable for operation in humid, corrosive, or wash-down environments where standard steel bearings would degrade. The bearing's design minimizes friction and heat generation, contributing to energy efficiency and extended service life in demanding applications such as pumps, conveyor systems, and general industrial machinery requiring dependable rotational support under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft and/or housing, applying gentle, even pressure for insertion. 3. Secure the bearing using appropriate retaining methods (e.g., snap rings, interference fit, locking collars) as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Utilize appropriate bearing installation tools (e.g., induction heaters, pressing devices) and apply force evenly to the correct ring (inner for shaft, outer for housing). |
| Contamination of the bearing during handling or installation. | Keep the bearing in its original packaging until ready for installation. Handle with clean, lint-free gloves and avoid exposing the raceways to dirt or foreign particles. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food processing equipment, Chemical pumps, Marine applications, Medical devices, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||