This 304 stainless steel deep groove ball bearing delivers exceptional load-carrying capacity and smooth operation. Ideal for corrosive environments, it ensures long-term reliability in power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 35mm |
| Width | 37mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 93mm, an outside diameter of 35mm, and a width of 37mm. Constructed from premium 304 stainless steel, it offers superior corrosion resistance, excellent durability, and a wide operating temperature range. The robust design minimizes friction and vibration, ensuring efficient power transmission in demanding industrial applications. Its precision engineering guarantees consistent performance and extended service life under rigorous conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid damaging the raceways. 3. Verify proper fit and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or race damage. | Use a bearing press or induction heater for controlled installation, ensuring force is applied to the correct ring. |
| Using the wrong lubricant or insufficient lubrication, causing premature wear. | Consult the bearing manufacturer's recommendations for appropriate lubricant type and quantity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Gearboxes, Conveyor Systems, High-Corrosion Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||