Engineered for superior performance and longevity, this 304 stainless steel deep groove ball bearing delivers exceptional load-carrying capacity and smooth rotational capabilities. Its corrosion resistance makes it ideal for challenging applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 177mm |
| Width | 19mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing features an inside diameter of 56mm, an outside diameter of 177mm, and a width of 19mm. The 304 stainless steel construction provides excellent corrosion resistance against a wide range of chemicals and environmental factors, making it suitable for food processing, chemical handling, and marine applications. This bearing is designed for reliable operation under moderate radial and axial loads, offering low friction and extended service life in demanding operational conditions where hygiene and resistance to degradation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, ensuring it seats squarely. 3. Verify smooth rotation and proper fit without excessive play or binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a properly sized bearing installer or press, applying force only to the ring being mounted (inner ring on shaft, outer ring in housing). |
| Improper lubrication, leading to premature wear. | Refer to the bearing manufacturer's lubrication guidelines for the specific grease or oil type and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Machinery, Chemical Processing Equipment, Marine and Offshore Applications, Medical Devices, Corrosive Environment Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||