This deep groove ball bearing, precision-machined from durable 304 stainless steel, offers exceptional load capacity and smooth operation. Its corrosion resistance makes it ideal for challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 67mm |
| Width | 42mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing features an inside diameter of 50mm, an outside diameter of 67mm, and a width of 42mm. The 304 stainless steel construction provides superior corrosion resistance, excellent tensile strength at moderate temperatures, and non-magnetic properties, making it suitable for operation in wet, humid, or mildly corrosive environments. The deep groove raceway design allows for high radial and axial loads in both directions, ensuring reliable performance in power transmission systems requiring durability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing mating surfaces are clean and free from debris. 2. Carefully press or drive the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing within the housing using appropriate retaining methods (e.g., snap rings, interference fit).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the raceways. | Use a bearing press or a properly sized sleeve for installation, applying force evenly to the outer ring or controlled hammering on the shaft. |
| Contaminating the bearing surfaces with dirt, dust, or lubricants during handling. | Handle bearings in a clean environment and keep them in their original packaging until ready for installation. Use clean tools and gloves. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial machinery and equipment, Conveyor systems, Electric motors and pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||