Engineered for superior performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and reliability in diverse operational environments. Its precise dimensions ensure seamless integration into power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 29mm |
| Width | 6mm |
A proven choice for industrial professionals, this 304 stainless steel deep groove ball bearing boasts an inside diameter of 44mm, an outside diameter of 29mm, and a width of 6mm. Fabricated from high-grade 304 stainless steel, it exhibits excellent resistance to rust, corrosion, and a wide range of chemicals, making it ideal for wet, humid, or chemically aggressive environments. The robust construction ensures sustained load-bearing capacity and smooth rotational performance, minimizing friction and energy loss in power transmission applications like conveyor systems, pumps, and electric motors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly to remove any debris or lubrication. 2. Carefully press the bearing into the shaft or housing using a bearing installer or a properly sized sleeve, applying even pressure. 3. Verify smooth rotation and ensure the bearing is seated flush against its locating shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a bearing press or a controlled hydraulic method for installation, ensuring force is applied to the correct ring of the bearing. |
| Incorrect lubrication, either too much or too little, or using an incompatible lubricant. | Consult the bearing manufacturer's specifications for the appropriate lubricant type and quantity. Ensure consistent and adequate lubrication. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Pumps and Compressors, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||