This deep groove ball bearing, crafted from robust 304 stainless steel, offers exceptional corrosion resistance and durability. Its precise 42x50x28mm dimensions ensure seamless integration into power transmission systems, providing reliable rotational support.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 50mm |
| Width | 28mm |
Manufactured under strict quality controls, this 304 stainless steel deep groove ball bearing features an internal diameter of 42mm, an external diameter of 50mm, and a width of 28mm. The 304 stainless steel construction provides superior resistance to rust and chemical degradation, making it suitable for wet, corrosive, or high-temperature environments. Its design offers a good balance of radial and axial load support, ensuring smooth, low-friction operation in various power transmission applications requiring enhanced longevity and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly. 2. Apply a thin, even layer of appropriate lubricant to the shaft and the inner bore of the bearing. 3. Gently press or tap the bearing onto the shaft, ensuring it seats fully and squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty shaft. | Ensure both the shaft and the bearing's inner bore are meticulously clean before installation. |
| Improper seating, leading to uneven load distribution. | Use a proper bearing press or carefully apply even pressure to ensure the bearing is fully and squarely seated on the shaft. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor systems in food processing or chemical industries, Marine equipment and offshore machinery, Pumps and fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||