This 304 stainless steel deep groove ball bearing provides superior corrosion resistance and smooth, low-friction operation. Engineered for reliability in diverse environments, it's a critical component for power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 41mm |
| Outside Diameter | 149mm |
| Width | 18mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing offers a nominal inside diameter of 41mm and an outside diameter of 149mm, with a precise width of 18mm. The 304 stainless steel construction ensures excellent resistance to rust, corrosion, and chemical attack, making it ideal for operation in humid, corrosive, or washdown environments. Its robust design and high-quality materials deliver consistent, low-friction performance, minimizing wear and maximizing the efficiency of power transmission systems across various industrial sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply force to the inner ring when mounting on a shaft and to the outer ring when mounting in a housing to prevent brinelling. |
| Contaminating the bearing during installation. | Handle bearings with clean hands and tools, and avoid exposing them to dust or other contaminants. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Pumps and Compressors in corrosive environments, Food Processing Machinery (washdown applications), Marine Equipment and Offshore Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||