Engineered for superior performance in demanding environments, this 304 stainless steel deep groove ball bearing offers exceptional durability and corrosion resistance. Its precise dimensions ensure smooth operation in critical power transmission applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 168mm |
| Width | 36mm |
A proven choice for industrial professionals, this deep groove ball bearing is constructed from high-grade 304 stainless steel, offering excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for wet or corrosive environments. With an inside diameter of 16mm, an outside diameter of 168mm, and a width of 36mm, it is designed for robust load-bearing capabilities in high-speed rotational applications. The precision-ground raceways and balls ensure minimal friction and extended service life under continuous operation. Its inherent material properties contribute to operational stability and reliability across diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of debris. Use appropriate measuring tools to verify dimensions. 2. Carefully press the bearing onto the shaft or into the housing. Avoid using excessive force and ensure alignment to prevent damage to the raceways. 3. Secure the bearing using a retaining ring or other designated mounting hardware. Verify proper seating and free rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a proper bearing press or induction heater for installation. Ensure consistent, even pressure is applied to the ring of the bearing being pressed. |
| Incorrect shaft or housing bore diameter, causing the bearing to be too loose or too tight. | Thoroughly measure shaft and housing dimensions using precision tools (micrometer, bore gauge) and consult bearing fit charts for recommended tolerances. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Pumps and Compressors, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||