Engineered from superior 304 stainless steel, this deep groove ball bearing offers exceptional corrosion resistance and robust performance in demanding power transmission systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 93mm |
| Width | 39mm |
Specified by design engineers worldwide, this 304 stainless steel deep groove ball bearing features an internal diameter of 35mm, an external diameter of 93mm, and a width of 39mm. Its 304 stainless steel construction provides excellent resistance to rust and chemical attack, making it ideal for environments with moisture or corrosive agents. The deep groove geometry allows for high radial and axial loads, ensuring smooth, reliable operation in a wide range of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Apply a thin, even layer of appropriate lubricant to bearing raceways and shaft. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with excessive or uneven force. | Utilize a proper bearing installation tool (e.g., press, induction heater) for controlled and even force application. |
| Contaminating the bearing during installation. | Keep the bearing in its original packaging until immediately before installation and handle with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor Systems, Electric Motors, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||