This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. Its robust construction ensures smooth, low-friction operation in challenging industrial and marine applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 23mm |
| Width | 39mm |
Engineered for reliability and performance, this deep groove ball bearing boasts an inside diameter of 49mm, an outside diameter of 23mm, and a width of 39mm. Constructed from premium 304 stainless steel, it provides exceptional resistance to rust and corrosion, making it ideal for operation in humid, corrosive, or washdown environments. The precise internal geometry minimizes friction and heat buildup, ensuring extended service life and optimal load-carrying capacity in applications requiring high precision and resilience.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. Verify dimensional compatibility. 2. Carefully press the bearing onto the shaft or into the housing, applying even force. Avoid hammering directly on the bearing races. 3. Install retaining rings or other fastening mechanisms to secure the bearing in its designated position.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing races during installation. | Use a bearing press or a properly sized drift to apply force evenly to the ring being fitted (inner ring for shaft mounting, outer ring for housing mounting). |
| Incorrect shaft or housing fit, leading to premature wear or bearing failure. | Ensure the shaft and housing bores meet the specified tolerance ranges for the bearing's fit. An interference fit is typically required for the inner ring on the shaft and/or the outer ring in the housing. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food processing machinery, Chemical processing equipment, Marine applications, Medical devices, Corrosive environment conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||