Engineered from premium 304 stainless steel, this deep groove ball bearing offers superior corrosion resistance and reliability. Its precise dimensions ensure smooth, low-friction operation in a wide range of industrial power transmission applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 171mm |
| Width | 6mm |
Built to exacting engineering tolerances, this 304 stainless steel deep groove ball bearing boasts an inside diameter of 27mm, an outside diameter of 171mm, and a width of 6mm. The 304 stainless steel construction provides excellent resistance to rust and chemical corrosion, making it suitable for operation in humid, corrosive, or wash-down environments. This bearing is designed for high-speed rotation and moderate radial and axial loads, ensuring efficient power transmission in applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | When pressing onto a shaft, apply force to the inner ring. When pressing into a housing, apply force to the outer ring. |
| Using excessive force, leading to brinelling or deformation. | Utilize a bearing press or appropriate tooling to apply controlled, even force. Avoid hammering the bearing. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food processing machinery, Chemical processing equipment, Marine applications, Medical devices, Outdoor power transmission systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||