This 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and durability. Engineered with precision for smooth, low-friction rotation, it's a critical component in power transmission systems demanding reliability in challenging environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 67mm |
| Outside Diameter | 184mm |
| Width | 5mm |
Engineered for reliability and performance, this 304 stainless steel deep groove ball bearing boasts an inside diameter of 67mm, an outside diameter of 184mm, and a width of 5mm. The 304 stainless steel construction provides superior resistance to rust and corrosion, making it suitable for wet, humid, or chemically aggressive environments. Its design minimizes friction and vibration, ensuring efficient power transfer and extended operational life in applications ranging from industrial machinery and pumps to food processing equipment and marine systems. This bearing is built to withstand moderate radial and axial loads, offering consistent performance under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris or burrs. 2. Carefully align the bearing with the shaft or housing, applying even pressure to seat it fully. 3. Avoid hammering directly on the bearing rings; use an appropriate press or sleeve for installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or hammering directly on bearing races during installation. | Use a proper bearing press or a clean, soft metal sleeve that contacts the ring being pressed to distribute force evenly. |
| Improper shaft or housing fit, leading to brinelling or premature wear. | Verify that the shaft and housing dimensions adhere to recommended tolerances for a tight, but not overly stressed, fit. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Machinery, Pumps and Compressors, Food Processing Equipment, Marine Applications, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||