This 304 stainless steel deep groove ball bearing is engineered for optimal performance in corrosive environments. Its robust construction ensures reliable power transmission and longevity in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 24mm |
| Outside Diameter | 50mm |
| Width | 28mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 24mm inside diameter, 50mm outside diameter, and a 28mm width. Constructed from premium 304 stainless steel, it offers exceptional resistance to corrosion, rust, and chemical degradation, making it ideal for wet, humid, or chemically aggressive environments. The precise internal geometry ensures smooth operation, low friction, and efficient power transmission. It is designed to handle moderate radial and axial loads, providing consistent performance in a wide array of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper fit before full load application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Apply force only to the ring being mounted (inner ring for shaft, outer ring for housing) to prevent brinelling or damage. |
| Improper lubrication leading to premature wear. | Lubricate with the recommended grease or oil according to the application's operating conditions and load requirements. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food processing machinery, Marine equipment, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||