This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability. With precise dimensions, it ensures smooth, low-friction operation in a wide range of industrial environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 20mm |
| Outside Diameter | 33mm |
| Width | 26mm |
Engineered for reliability and performance, this deep groove ball bearing is constructed from premium 304 stainless steel, renowned for its excellent corrosion resistance, especially in humid or chemically aggressive conditions. The precise internal and external dimensions of 20mm and 33mm respectively, coupled with a 26mm width, ensure accurate fitment and optimal load distribution. This bearing's inherent material properties make it ideal for applications where rust prevention and extended service life are critical, such as food processing equipment, marine environments, and chemical handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press or slide the bearing onto the shaft, applying even pressure to the inner ring. 3. Secure the bearing in its housing, ensuring proper axial and radial clearance as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force exclusively to the inner ring when mounting on a shaft to prevent brinelling and premature failure. |
| Insufficient lubrication or using incompatible lubricants. | Refer to lubrication charts and ensure the bearing is adequately lubricated with a compatible grease or oil for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food & Beverage Processing Machinery, Marine Equipment, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||