Engineered for superior performance and longevity, this 304 stainless steel deep groove ball bearing delivers exceptional load-bearing capacity and smooth rotational efficiency. Its corrosion resistance makes it ideal for harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 20mm |
| Outside Diameter | 198mm |
| Width | 26mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an inside diameter of 20mm, an outside diameter of 198mm, and a width of 26mm. Constructed from premium 304 stainless steel, it offers excellent resistance to corrosion, oxidation, and a wide range of chemicals, ensuring reliable operation in challenging conditions. The precise geometry of the raceways and balls minimizes friction and vibration, promoting extended service life and optimal power transmission efficiency in demanding industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner ring for shaft mounting, outer ring for housing mounting). 3. Verify proper axial and radial clearance before fully seating the bearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong bearing ring during installation. | Always apply mounting force to the ring that is being press-fitted (inner ring for shaft, outer ring for housing). |
| Contaminating the bearing during handling or installation. | Handle bearings in a clean environment and avoid direct contact with bare hands. Use clean tools and lubricants. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Conveyor systems, Electric motors, Pumps and compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||