Engineered for robust performance, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and load-carrying capacity. Its precise dimensions ensure smooth operation and extended service life in demanding industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 116mm |
| Width | 36mm |
Specified by design engineers worldwide, this deep groove ball bearing features an internal diameter of 50mm, an external diameter of 116mm, and a width of 36mm. Constructed from premium 304 stainless steel, it provides superior resistance to rust and chemical attack, making it ideal for corrosive environments. The raceway geometry is optimized for high radial and axial loads, ensuring reliable operation and reduced friction in power transmission systems. Its hardened steel balls and precision-ground races guarantee smooth, quiet running and extended operational lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces and shaft thoroughly. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Install the bearing into the housing, applying even pressure. 4. Verify free rotation of the shaft.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mounting surfaces leading to contamination. | Thoroughly degrease and inspect all mating surfaces before installation. |
| Excessive force applied during press-fitting, causing brinelling. | Use a proper bearing installer or hydraulic press with controlled force to avoid damaging the raceways. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial pumps and compressors, Conveyor systems, Material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||