Engineered for exceptional load-bearing capacity and smooth operation, this 304 stainless steel deep groove ball bearing is a critical component for reliable power transmission systems. Its robust construction ensures longevity in challenging environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 94mm |
| Width | 42mm |
A high-performance industrial component, this deep groove ball bearing is precision-manufactured from premium 304 stainless steel, offering superior corrosion resistance, particularly in humid or chemically aggressive environments. The specified dimensions of 18mm inside diameter, 94mm outside diameter, and 42mm width facilitate integration into a wide range of machinery. The inherent properties of 304 stainless steel contribute to its durability and ability to withstand moderate axial and radial loads, making it suitable for applications requiring both strength and environmental resilience. Its design minimizes friction, promoting energy efficiency and extended service life under continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. Verify shaft and housing dimensions meet specified tolerances. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without any cocking. Use appropriate tools to apply even pressure to the inner ring. 3. Mount the shaft assembly into the housing, ensuring the outer ring of the bearing is properly supported and that axial loads are managed through appropriate retaining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when installing onto the shaft to prevent damage to the raceways and rolling elements. |
| Insufficient lubrication or use of incorrect lubricant. | Ensure the bearing is adequately lubricated with the specified grease or oil type and quantity for the intended operating conditions and temperature range. |
| Over-tightening of retaining elements, causing excessive preload. | Install shaft collars or end caps with appropriate torque specifications to avoid over-constraining the bearing and inducing premature failure. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Conveyor Systems, Electric Motors and Gearboxes, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||