Engineered for superior performance and longevity, this 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance. Its robust construction ensures reliable operation in harsh environments within power transmission systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 17mm |
| Outside Diameter | 192mm |
| Width | 22mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an internal diameter of 17mm and an external diameter of 192mm, with a width of 22mm. Constructed from premium 304 stainless steel, it provides excellent resistance to corrosion and oxidation, making it suitable for environments exposed to moisture, chemicals, or saltwater. This material also offers good mechanical strength and durability for continuous operation in moderate load applications. Precision ground raceways ensure smooth rotation and reduced friction, contributing to efficient power transmission and extended service life in demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free from debris. Verify dimensions match bearing specifications. 2. Gently press the bearing onto the shaft, ensuring it seats fully and squarely. Avoid hammering directly on the bearing's outer ring. 3. Install the bearing into the housing, again ensuring a snug and square fit. Secure housing components to maintain proper bearing alignment and pre-load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing installation tool or press, applying force only to the ring being fitted (inner ring on shaft, outer ring in housing). |
| Incorrect shaft or housing fit (too loose or too tight), causing premature wear or operational issues. | Adhere strictly to recommended shaft and housing fit tolerances for the specific bearing and application to ensure optimal performance and lifespan. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial gearboxes and reducers, Conveyor systems in corrosive environments, Marine equipment and offshore machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||