Engineered for reliability, this 304 stainless steel deep groove ball bearing delivers smooth, low-friction performance in corrosive environments. Its robust construction ensures consistent power transmission.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 194mm |
| Width | 18mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 42mm and an outside diameter of 194mm, with a width of 18mm. Constructed from premium 304 stainless steel, it offers exceptional resistance to corrosion, making it ideal for food processing, chemical handling, and marine applications where standard bearings would degrade. The precise manufacturing ensures high radial and axial load capacity, contributing to extended equipment life and reduced maintenance in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces are clean and free from debris. 2. Carefully press the bearing onto its shaft, using an arbor press or appropriate bearing installation tool to apply even pressure to the inner ring. 3. For housing installation, gently tap the outer ring into the housing bore, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when pressing onto the shaft. | Always apply installation force to the ring that is being fitted. For shaft mounting, press on the inner ring; for housing mounting, press on the outer ring. |
| Overheating the bearing during press-fitting. | Avoid excessive heat. If heating is necessary, use an induction heater or an oil bath at a controlled temperature (typically below 120°C or 250°F) to prevent material degradation. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Chemical Processing Machinery, Marine and Offshore Equipment, Conveyor Systems in Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||