This 304 stainless steel deep groove ball bearing offers superior corrosion resistance and robust performance. Engineered for reliability in demanding environments, it ensures smooth, low-friction rotation under significant radial and axial loads.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 15mm |
| Outside Diameter | 81mm |
| Width | 37mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an internal diameter of 15mm, an external diameter of 81mm, and a width of 37mm. Constructed from premium 304 stainless steel, it exhibits exceptional resistance to rust, corrosion, and mild acids, making it ideal for wet, humid, or chemically aggressive environments. The hardened raceways and precision-ground balls ensure optimal load distribution and reduced wear, contributing to extended service life and consistent operational efficiency. This bearing is designed to handle substantial radial and axial loads in both directions, ensuring stable power transmission across a wide range of operational speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the inner or outer ring respectively. 3. Verify proper seating and smooth rotation after installation. Ensure adequate lubrication is present.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing using impact on the wrong ring. | Always apply force to the ring that is being press-fit. For a shaft fit, press on the inner ring. For a housing fit, press on the outer ring. |
| Insufficient or incorrect lubrication. | Use the manufacturer-recommended lubricant type and quantity. Over- or under-lubrication can lead to premature failure. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food processing machinery, Medical equipment, Marine applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||