Engineered for exceptional load-bearing capacity and smooth rotational performance, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and durability in challenging industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 15mm |
| Outside Diameter | 121mm |
| Width | 10mm |
Precision-manufactured to tight tolerances, this 304 stainless steel deep groove ball bearing ensures optimal performance and longevity. With an internal diameter of 15mm, an external diameter of 121mm, and a width of 10mm, it is constructed from high-grade 304 stainless steel, renowned for its excellent corrosion resistance against a wide range of chemicals and environments, including moist or mildly corrosive atmospheres. This material also offers good mechanical strength and wear resistance, making it ideal for applications requiring a balance of durability and hygiene. Its deep groove raceway design allows it to accommodate radial and axial loads in both directions with low friction, ensuring efficient power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring only, or into the housing, applying even force to the outer ring only. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on the shaft. | Always apply mounting force to the inner ring when installing onto a shaft to prevent brinelling of the races. |
| Incorrect lubrication leading to premature wear. | Utilize a high-quality bearing grease or oil recommended for the operating temperature and load conditions. Ensure proper fill percentage. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Food and Beverage Processing Equipment, Marine Hardware, Chemical Processing Machinery, Medical Devices, Outdoor and Corrosive Environment Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||