Engineered for reliability in demanding environments, this 304 stainless steel deep groove ball bearing offers superior corrosion resistance and robust performance. Its precise dimensions ensure smooth operation and longevity in critical power transmission systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 14mm |
| Outside Diameter | 123mm |
| Width | 26mm |
A proven choice for industrial professionals, this 304 stainless steel deep groove ball bearing is meticulously manufactured to exacting standards. With an inside diameter of 14mm, an outside diameter of 123mm, and a width of 26mm, it provides exceptional load-bearing capacity and operational stability. The 304 stainless steel construction delivers inherent resistance to corrosion and oxidation, making it suitable for wet, humid, or chemically aggressive environments. Its deep groove raceway design accommodates both radial and axial loads, ensuring efficient power transmission in a wide array of machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the bearing seat and shaft to remove any contaminants. 2. Carefully press the bearing onto the shaft using appropriate tooling, ensuring uniform pressure to avoid damage. 3. Mount the bearing assembly into the housing, verifying proper alignment and clearance before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to raceways. | Utilize a bearing press or induction heater for controlled and even force application. |
| Inadequate lubrication, resulting in premature wear and increased operating temperature. | Ensure the bearing is properly lubricated with the specified grease or oil type and quantity for the application. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Gearboxes, Conveyor Systems, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||