This robust 304 stainless steel deep groove ball bearing offers exceptional corrosion resistance and durability. Engineered for smooth operation and reliable power transmission in challenging conditions.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 42mm |
| Outside Diameter | 29mm |
| Width | 31mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 42mm, an outside diameter of 29mm, and a width of 31mm. Constructed from premium 304 stainless steel, it provides superior resistance to rust, corrosion, and chemical attack, making it ideal for applications in marine, food processing, chemical, and outdoor environments. Its design ensures efficient load distribution and low friction, contributing to extended service life and optimal performance under radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, ensuring a snug fit without excessive force. 3. Verify proper alignment and secure the bearing using appropriate retaining mechanisms.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing with excessive hammer blows. | Use a bearing press or a controlled press-fit method to install the bearing, applying force evenly to the inner or outer ring as appropriate. |
| Improper lubrication prior to installation. | Apply the recommended lubricant sparingly to the bearing raceways before installation to ensure initial smooth operation and protection. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Marine equipment, Food and beverage processing machinery, Chemical handling systems, Outdoor industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||