This industrial O-ring, constructed from robust 304 stainless steel and Buna-N, ensures reliable sealing in demanding environments. Its precise dimensions guarantee a secure fit and exceptional performance.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 8.088" |
| Outside Diameter | 6.514" |
| Cross Section | 0.150" |
A high-performance industrial component, this Buna-N O-ring is engineered for superior sealing capabilities in challenging applications. Featuring an inside diameter of 8.088 inches, an outside diameter of 6.514 inches, and a cross-section of 0.150 inches, it provides a precise and consistent seal. The 304 stainless steel construction offers excellent corrosion resistance, while Buna-N (Nitrile) provides good resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of industrial fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both sealing surfaces thoroughly to remove any debris or contaminants. 2. Carefully place the O-ring onto the designated groove or shaft, ensuring it is seated without twisting. 3. Assemble the mating component, applying even pressure to compress the O-ring to its designed seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, even pressure during assembly. If resistance is encountered, re-inspect the O-ring and sealing surfaces. |
| Incorrectly selecting an O-ring material for the specific fluid or temperature environment. | Verify the chemical compatibility and temperature range of Buna-N against the intended application fluids and operating conditions. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Transfer Pipelines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||