This 304 stainless steel deep groove ball bearing offers exceptional load capacity and smooth operation. Engineered for reliability in corrosive environments, it ensures efficient power transmission in demanding industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 60mm |
| Outside Diameter | 182mm |
| Width | 39mm |
Purpose-built for heavy-duty applications, this 304 stainless steel deep groove ball bearing features a 60mm inside diameter, 182mm outside diameter, and a 39mm width. The inherent corrosion resistance of 304 stainless steel makes it ideal for operation in humid, wet, or chemically aggressive environments, preventing rust and degradation. Its robust construction ensures high radial and axial load-carrying capabilities, minimizing friction and heat generation for extended service life in critical power transmission systems. Suitable for pumps, conveyors, electric motors, and general machinery operating under challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating surfaces on the shaft and housing are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying gentle, even pressure for insertion. Avoid hammering. 3. Secure the bearing using appropriate retaining rings, locknuts, or interference fits as per equipment design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mounting surfaces leading to premature wear. | Thoroughly clean all mating surfaces of the shaft and housing to remove any dirt, dust, or old lubricant before installation. |
| Applying excessive force or shock loading during installation. | Use a proper bearing press or a soft-faced hammer with a suitable driver to apply force evenly and avoid damaging the bearing races or rolling elements. |
A: This Deep Groove Ball Bearing is manufactured from 304 Stainless Steel.
A: Industrial Pumps, Material Handling Conveyors, Electric Motor Shafts, Marine Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||