This 3.0" Schedule 80 seamless Nylon pipe offers exceptional strength and chemical resistance. Designed for demanding industrial fluid transfer applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.0" |
| Outside Diameter | 5.374" |
| Wall Thickness | 0.497" |
Manufactured under strict quality controls, this 3.0" Schedule 80 seamless Nylon pipe boasts an outside diameter of 5.374" and a robust wall thickness of 0.497". Its inherent material properties provide excellent resistance to a wide range of chemicals, abrasion, and impact, making it ideal for high-pressure pneumatic and hydraulic systems, as well as the transport of aggressive fluids. The seamless construction ensures consistent wall thickness and superior integrity, minimizing leak potential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Apply appropriate solvent cement and primer to both pipe and fitting surfaces. 3. Insert pipe into fitting with a slight twisting motion, holding for 30 seconds to set. 4. Allow adequate curing time as per solvent cement manufacturer's specifications before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use solvent cement specifically formulated for Nylon (polyamide) piping systems. |
| Inadequate curing time before system operation. | Adhere strictly to the solvent cement manufacturer's recommended curing times to ensure a strong, leak-proof bond. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: High-pressure pneumatic lines, Hydraulic fluid transfer, Chemical processing and transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||