This 3" Schedule 80 seamless nylon pipe offers exceptional strength and chemical resistance. Its robust construction ensures reliability in high-pressure fluid transfer applications where durability is paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.0" |
| Outside Diameter | 3.401" |
| Wall Thickness | 0.491" |
Specified by design engineers worldwide, this 3.0" nominal size seamless nylon pipe adheres to stringent Schedule 80 dimensional standards, featuring an outside diameter of 3.401" and a substantial wall thickness of 0.491". Manufactured from high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad chemical compatibility profile, making it ideal for conveying a wide range of fluids and gases under demanding operational pressures and temperatures. Its seamless construction guarantees leak-free performance and uniform wall integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of debris, and properly chamfered for coupling. 2. Apply appropriate solvent cement and primer (if applicable for the specific nylon type) to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting socket with a slight twisting motion until it bottoms out. 4. Hold firmly for the recommended set time (refer to solvent cement manufacturer's instructions) to allow for initial bonding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement or primer for nylon, leading to poor bond strength. | Always use solvent cements and primers specifically formulated and recommended for nylon piping systems by the manufacturer. |
| Insufficient curing time before pressurizing the system, resulting in joint failure. | Adhere strictly to the solvent cement manufacturer's specified setting and curing times before introducing any pressure to the system. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: High-pressure hydraulic lines, Chemical transfer systems, Pneumatic conveying lines, Industrial water and fluid distribution.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||