This 3.0" Schedule 80 seamless pipe, crafted from corrosion-resistant Aluminum 6061, offers exceptional strength and lightweight performance. Its precise dimensions ensure reliable fluid transfer and structural integrity in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.0" |
| Outside Diameter | 1.746" |
| Wall Thickness | 0.152" |
Precision-manufactured to tight tolerances, this 3.0" Schedule 80 seamless pipe boasts a nominal outside diameter of 1.746 inches and a wall thickness of 0.152 inches. Fabricated from Aluminum Alloy 6061, it offers an excellent balance of strength, corrosion resistance, and weldability, characteristic of this popular alloy. The seamless construction ensures uniform wall thickness, eliminating potential leak paths and enhancing pressure handling capabilities. This makes it suitable for applications where reliability under pressure and exposure to environmental elements are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support spacing to prevent sagging. 2. Clean pipe ends thoroughly before joining to remove any contaminants. 3. Utilize appropriate welding or joining techniques for Aluminum 6061, ensuring full penetration and structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible joining materials or methods with Aluminum 6061. | Consult material compatibility charts and use welding/joining procedures specifically recommended for Aluminum 6061 alloys. |
| Inadequate support leading to excessive stress on the pipe. | Follow industry standards for pipe support spacing based on pipe diameter, material, and fluid density. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Structural framing and supports, Fluid and gas conveyance systems, Marine and offshore components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||