This 3-inch Schedule 160 seamless pipe, crafted from robust 304 stainless steel, offers exceptional strength and corrosion resistance. Engineered for extreme pressure applications, it ensures reliable performance in critical industrial settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.0" |
| Outside Diameter | 6.205" |
| Wall Thickness | 0.370" |
Built to exacting engineering tolerances, this 3.0" nominal size seamless pipe boasts a precise 6.205" outside diameter and a substantial 0.370" wall thickness, classifying it as Schedule 160. Manufactured from 304 stainless steel, it exhibits superior tensile strength, yield strength, and excellent resistance to a wide range of corrosive media, including acids, alkalis, and chlorides. This robust construction makes it ideal for high-pressure fluid transfer, chemical processing, and demanding structural applications where integrity under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of contaminants. 2. Prepare pipe and fitting for welding according to industry best practices for 304 stainless steel, including proper beveling and surface preparation. 3. Perform welding using approved procedures and filler materials for 304 stainless steel, followed by post-weld heat treatment if required by application specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation prior to welding, leading to weld defects. | Thoroughly clean and deburr pipe ends, removing all oil, grease, and oxides. Use appropriate stainless steel brushes and solvents. |
| Using incorrect welding filler material, compromising corrosion resistance and mechanical properties. | Always use a filler material specifically recommended for 304 stainless steel, such as ER308L, to maintain the intended material integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from 304 Stainless Steel.
A: High-pressure fluid and gas transfer systems, Chemical processing and petrochemical industries, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||