This robust 3-inch polycarbonate U-bolt offers exceptional corrosion resistance and non-conductivity. Engineered for demanding environments, it ensures secure pipe support where traditional metal fasteners fail.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 3.28" |
| Inside Length ( B) | 5.46" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this U-bolt boasts superior dielectric strength and chemical inertness, ideal for corrosive atmospheres and applications requiring electrical isolation. The precisely engineered dimensions, with an Inside Width (A) of 3.28 inches and an Inside Length (B) of 5.46 inches, accommodate standard 3-inch piping. The durable polycarbonate construction provides significant load-bearing capacity and long-term performance, exceeding expectations in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests securely on the supporting surface. 2. Insert the threaded ends through the mounting holes of the mating hardware. 3. Securely tighten the nuts onto the threaded ends, applying even pressure to avoid over-stressing the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, leading to potential cracking of the polycarbonate. | Use a torque wrench to tighten nuts to the manufacturer's recommended torque specification for polycarbonate fasteners. |
| Using the wrong size U-bolt for the pipe diameter. | Verify the pipe's nominal outer diameter and ensure it matches the inside dimensions of the U-bolt, accounting for any insulation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||