Engineered for high-performance applications, this 3-inch polycarbonate U-bolt provides exceptional strength and corrosion resistance. Its robust design ensures secure pipe support in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 1.10" |
| Inside Length ( B) | 6.38" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this 3-inch U-bolt is constructed from high-impact, chemical-resistant polycarbonate. Featuring an inside width (A) of 1.10 inches and an inside length (B) of 6.38 inches, it accommodates standard 3-inch nominal pipe sizes. The 1/2"-13 UNC thread size offers robust fastening capabilities. Polycarbonate's non-conductive and UV-stable properties make it suitable for applications where electrical insulation or outdoor exposure is a concern, preventing galvanic corrosion and degradation. This U-bolt is an excellent choice for water treatment, chemical processing, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3-inch pipe and the mounting surface. 2. Insert the threaded legs through the mounting holes. 3. Secure using the provided nuts and washers (not included), tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress the polycarbonate material. | Tighten nuts until snug, ensuring a secure fit without deforming the U-bolt. |
| Using the U-bolt with chemicals or temperatures outside its specified resistance range. | Verify chemical compatibility and operating temperature limits before installation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Pipe and conduit support in chemical plants, Marine and offshore installations, Water and wastewater treatment facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||