This 3-inch polycarbonate U-bolt offers exceptional corrosion resistance and dielectric strength. Engineered for secure, non-conductive pipe support in demanding industrial environments, ensuring longevity and safety.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 2.94" |
| Inside Length ( B) | 5.95" |
| Thread Size | 1/2"-13 |
Purpose-built for heavy-duty applications, this 3-inch polycarbonate U-bolt features an inside width of 2.94 inches and an inside length of 5.95 inches, accommodating standard 3-inch nominal pipes. The robust polycarbonate material provides superior chemical resistance to a wide range of corrosive substances and offers excellent electrical insulation properties, making it ideal for environments where galvanic corrosion or electrical conductivity is a concern. Equipped with a 1/2"-13 UNC thread size on both legs, it ensures a secure and reliable fastening solution for a variety of pipe hanging and support systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it sits flush against the mounting surface. 2. Insert the threaded legs through the mounting holes or bracket. 3. Securely fasten with appropriate washers and nuts, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress the polycarbonate material. | Tighten nuts firmly but avoid excessive force. Use a torque wrench if specifications are available. |
| Using the U-bolt for applications exceeding its load or temperature ratings. | Consult product datasheets for maximum load capacity and operating temperature range before installation. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Food and beverage processing, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||