This 3-inch polycarbonate U-bolt offers superior corrosion resistance for secure pipe clamping. Its robust design ensures long-term performance in demanding industrial settings where metal fasteners would degrade.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 2.84" |
| Inside Length ( B) | 6.04" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this 3-inch U-bolt is constructed from high-strength, chemically inert polycarbonate, providing exceptional resistance to a wide range of corrosive agents and UV degradation. With an inside width (A) of 2.84 inches and an inside length (B) of 6.04 inches, it offers a precise fit for 3-inch nominal pipe sizes. The 1/2"-13 UNC thread size ensures compatibility with standard hardware for secure fastening in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and mounting surface. 2. Insert the threaded legs through the mounting holes or bracket. 3. Secure with appropriate washers and nuts, tightening evenly to the specified torque.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress the polycarbonate material. | Tighten nuts firmly but avoid excessive force. Use a torque wrench if precise control is required. |
| Using the U-bolt for loads exceeding its rated capacity. | Verify the load requirements for the application and ensure they are within the specifications of this polycarbonate U-bolt. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||