This 3" Polycarbonate U-Bolt provides a robust, non-conductive, and corrosion-resistant solution for pipe support. Engineered for demanding environments, it ensures long-term integrity and safety.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 2.33" |
| Inside Length ( B) | 5.30" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-Bolt is constructed from high-grade polycarbonate, renowned for its exceptional chemical resistance, UV stability, and impact strength. The internal dimensions are precisely machined to accommodate a 3" nominal pipe size, with an Inside Width (A) of 2.33" and an Inside Length (B) of 5.30". The standard 1/2"-13 UNC thread size ensures compatibility with common fastening hardware. This material selection minimizes galvanic corrosion and electrical conductivity, making it ideal for marine, chemical processing, and outdoor applications where traditional metal fasteners would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the mounting surface. 2. Insert the threaded ends through the appropriate holes in the mounting plate or bracket. 3. Secure firmly with washers and nuts, tightening evenly on both sides to ensure uniform pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the polycarbonate. | Tighten nuts until snug, then an additional 1/4 to 1/2 turn. Avoid excessive force. |
| Using incompatible hardware that can damage the polycarbonate threads. | Always use hardware with the specified 1/2"-13 thread size and ensure it is clean and free of burrs. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plant piping, Marine and offshore installations, Water treatment facilities, Outdoor conduit and pipe support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||