Engineered for demanding environments, this 3" Polycarbonate U-Bolt offers superior corrosion resistance. Its robust design ensures secure pipe support with a non-conductive, lightweight profile.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 3.49" |
| Inside Length ( B) | 2.48" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Polycarbonate U-Bolt is manufactured from high-impact, UV-stabilized polycarbonate, ensuring exceptional durability and resistance to a wide range of chemicals and environmental factors. It features an inside width (A) of 3.49 inches and an inside length (B) of 2.48 inches, designed to accommodate standard 3-inch nominal pipe sizes. The 1/2"-13 UNC thread size on the U-bolt legs allows for secure fastening with standard nuts and washers, providing a reliable and long-lasting solution for pipe suspension and bracing in corrosive or electrically sensitive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it is centered for even load distribution. 2. Thread the nuts onto the U-bolt legs until snug, applying even torque to both sides. 3. Tighten the nuts securely according to specified load requirements, but avoid overtightening to prevent deformation of the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nuts | Apply torque gradually and evenly to both nuts, adhering to recommended torque values to prevent cracking or deformation of the polycarbonate. |
| Incorrect pipe size selection | Verify that the U-bolt's internal dimensions (A and B) are appropriate for the specific outside diameter of the pipe being supported. |
A: This Polycarbonate U-Bolt, 3" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore structures, Food and beverage production, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||